Cleaning and Sanitizing Procedures (con’t)

10.) Reassemble the mixing unit back together, according to the following procedures (see fig. Y):

Moisten the bowl seal (P) with water and slip it into place at the back of cylin- der with ribs angled toward back of freezer.

Apply food grade lubricant to the inside of the shaft seal (O) and put the shaft seal (O) back on with the flared end of seal toward back of freezer.

Put the auger assembly (N) back on the evaporator.

Secure all the parts in place by screwing on the bolt (M) counterclockwise.

11.) Reassemble the bowl (L), positioning it into place. Make sure that the bowl fits tightly to the bowl seal (see fig. Z). We also suggest that the rear part of the bowl be moistened with water or lightly lubricated at the point where it fits together with the seal to make it easier to install bowl.

11a.) The lower right and left bowl flanges should fit on the outside of each black tri- angle edge (see fig. AA). The lid cover will not fit properly if this is not cor-

rectly positioned.

12.) Secure the bowl (L) by keeping it lifted until the bolt (M) is aligned with its hole (S), then tightly screw on the knobs (F) without exerting excessive pressure to avoid cracking the bowl (see fig. BB).

13.) Reassemble the mixing rod (O) so that its gears are aligned with the lower gear ring. This will allow the front pin to fit perfectly in its position on the bowl (see fig. CC).

14.) Reassemble in sequence the parts of the dispensing valve as follows (see fig. DD).

Make sure that the dispensing valve seat is properly

lubricated with food-grade lubricant (such as Haynes Lubrifilm).

Put the dispensing valve body (T) in its seat.

Insert the spring (U).

Put the dispensing valve upper body (V) into its position until it completely snaps into place.

Reassemble the handle (B) and insert retaining pin (G) following the same procedures in #5, fig. S.

15.) Reinstall the drain tray (fig. T). Make sure that the condensation drainage tube (J) is reinserted into its correct fixed position, allowing it to drain into the tray.

(Figure Y)

(Figure Z)

Bowl outside corner must be over the white plastic edge.

(Figure AA)

(Figure BB)

(Figure CC)

(Figure DD)

Page 10

G & MG Series Granita Machine

Page 10
Image 10
Grindmaster G & MG Series instruction manual Cleaning and Sanitizing Procedures con’t, Rectly positioned

G & MG Series specifications

Grindmaster G & MG Series showcases a remarkable innovation in the world of coffee grinding technology, blending efficiency, durability, and performance to meet the needs of coffee enthusiasts and professionals alike. These grinders are designed to deliver a superior grinding experience, ensuring that every bean is ground to perfection.

One of the standout features of the Grindmaster G & MG Series is its grinding consistency. Utilizing advanced burr grinding technology, these machines maintain an even grind size, essential for achieving the ideal flavor extraction in every brew. The series includes both flat and conical burr options, allowing users to select the type that best matches their brewing method. This versatility is critical for accommodating a range of coffee styles, from espresso to French press.

Another key characteristic of the G & MG Series is its user-friendly interface. Featuring intuitive controls and clear display options, operators can easily adjust grind settings to achieve their desired consistency. The timers and dosing controls enable precise measurements, ensuring that every cup is brewed with the exact amount of coffee needed for optimal taste.

Durability is a hallmark of the Grindmaster brand, and this series is no exception. Built with robust materials, the G & MG Series is designed to withstand the demands of high-volume coffee environments, such as cafes and restaurants. The components are engineered for longevity, minimizing maintenance downtime and ensuring that the grinder remains a reliable tool in any setting.

Furthermore, the Grindmaster G & MG Series integrates innovative technologies to enhance user experience. The models are equipped with noise-reducing features, making them suitable for environments where quiet operation is essential. Additionally, some models in the series offer advanced thermal stability technology, which helps maintain consistent performance without overheating.

In terms of design, the G & MG Series showcases a sleek, modern aesthetic that fits seamlessly into any café or kitchen decor. The grinders are available in various colors and finishes, allowing business owners to choose a look that aligns with their brand identity.

In conclusion, the Grindmaster G & MG Series stands out as a top choice for coffee grinding, combining advanced technology, user-friendly features, and robust construction. Whether for home use or commercial applications, these grinders provide an exceptional grinding experience, ultimately elevating the quality of coffee served.