PREPARATION FOR USE
INSTALLATION
•Unpack all parts and remove protective material.
•Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
•Do not cover any vents and make sure that there is a space of several centimetres around the unit for ventilation.
CONNECTIONS
1)Connect left and right speaker to left and right speaker jacks.
2)Before connecting the unit to the mains, make sure that the AC voltage printed on the back plate is the same as the AC voltage from your wall outlet.
RADIO OPERATION
GENERAL OPERATION
1.Set the “FUNCTION” selector to “RADIO” mode.
2.Select desired band by using the “BAND” selector.
3.Adjust radio frequency to your desired station by using the “TUNING” control.
4.Adjust the “VOLUME” control to the desired level.
FM / FM-STEREO RECEPTION
-Set the “BAND” selector to FM mode for MONO reception.
-Set the “BAND” selector to FM ST. mode for FM STEREO reception. The Stereo indicator light up to show FM ST. mode
FOR BETTER RECEPTION
FM - The receiver has a built - in FM wire antenna located from the rear cabinet. This wire be completely unraveled and extended for best reception.
AM - This appliance is equipped with a built - in directional ferrite antenna. Rotate the unit to get the best reception.
|
| CD OPERATION |
GENERAL OPERATION | ||
PLAY / PAUSE | Press to start playing CD disc. | |
|
| Press again to stop playing CD operation temporarily. |
|
| Press again to resume playback. |
SKIP + | & | Press to go to the next track or back to the previous track. |
SKIP - |
| Press and hold while playing until you find the point of the sound. |
STOP |
| Press to stop all CD operation. |
12.