Elta 4250N manual Power Sources, Placement, Clock Setting, Radio Operation

01-4250N-GE,GB 7/21/06 12:08 PM Page 8

POWER SOURCES

Insert 1 pc of 9V type (006P size) battery into the battery compartment (10) for clock back-up purpose. Before plugging in the AC power cord, please check the rating plate of your unit. It MUST MATCH with your household main supply. Then plug the AC power plug into the mains power supply.

NOTE: Always remove the batteries from the battery compartment when the unit is not going to be used for a long period of time. You avoid battery leakage, which would damage the unit. To have the best performance, the using of alkaline battery is recommended.

PLACEMENT

This unit is specially designed to be installed under the kitchen cabinet, or placed at the desktop by using the stand foot. Please refer to the —INSTALLATION— section for under kitchen cabinet mounting.

Desktop

CLOCK SETTING

1.To set hour, while holding the Time Set button (4) down, press the Hour Set button (5) until the desired hour is displayed. Release both buttons.

2.To set the minute, while holding the Time Set button (4) down, press the Minute Set button (6) until the correct time appeared on the Clock Display (9). Release both buttons.

RADIO OPERATION

1.To switch on the radio, slide the Function switch (7) to the "ON" position.

2.Then adjust your desired sound volume level by turning the Volume control (1).

3.Turn the Tuning Control (8) to select your favorite radio station.

4.To turn off the unit, slide the Function switch (7) to "OFF" position.

NOTE: The External Wire Antenna (11) is effective for FM band. Un-wire the entire antenna & hang it to a higher position for the best reception.

8.