
2.Ensure that the Mainboard is face up (the Heatsink and CPU are not visible). Place the Mainboard in the chassis, left side first (1), and press down to install (2).
NOTE: Make sure the I/O ports are positioned correctly through the lower cover, and the screw sockets are visible through the mainboard.
1
2
3.Replace the single securing screw.
4.Press down on the DC IN cable to secure the adhesive in place.
Replacing the Modem Module
1.Connect the Modem cable to the Modem Module as shown.
2.Replace the Modem Module and secure the two screws as shown.
Chapter 3 | 91 |