Installing the Switch in the Rack/Cabinet

Installing the DS-xxB2 Switch

To install the switch in the rack/cabinet:

1.Lift and orient the switch so that the fan end is to the front of the rack/cabinet.

2.Align the bracket on each side of the switch with the “C” channel on each fixed rail.

3.Push the switch into the rack/cabinet until the hole in the front part of each bracket (the “L”-shaped end) aligns with the hole on the fixed rail.

EMC2049S

Figure 16 Placing the Switch Into the Rack/Cabinet

4.Secure the brackets to the rails with two M3 x 8-mm pan-head screws (see Table 5 on page 6), one on each side, (Figure 17 on page 19).

EMC Departmental Switch DS-xxB2 Into Third-Party Racks