Tools Required for Installation | EMC DS-xxB2 specification

Switch Mounting Kit (DS16B2RKLS)

Tools Required for Installation

You will need the tools shown in Figure 4 to complete the installation of the rails and one or more switches.

Tools Required:

	#1 Phillips	6-mm (1/4-in.)	8mm (5/16-in.)
	Screwdriver	Nut Driver	Nut Driver
			EMC2065
Figure 4	Tools Required for Installation

EMC Departmental Switch DS-xxB2 Into Third-Party Racks

7

Image 7

EMC DS-xxB2 dimensions Tools Required for Installation

Contents

EMC Departmental Switch DS-xxB2 Guide for Installation of Switches Into Third-Party Racks Device Device Model Mounting Kit Model Overview Device Device Power, Cooling, and Weight InformationDevice Dimensions Device Power Requirements Heat Dissipation Front Rear Device Placement Requirements Use Switch Mounting Kit DS16B2RKLS Component Use Screws, Nuts and Washers Tools Required Tools Required for Installation Rear Door Removed for Clarity Front Installing the DS-xxB2 Rails DS-xxB2 Short Rear Rails DS-xxB2 Rails Installation Front Rails Screw Holes DS-xxB2 Rails Assembly Location of Keps Nuts Assembling the Rails Securing the Keps Nuts Round-Hole Channel Installing Rails in Round-Hole Channels Square-Hole Channel Installing Rails in Square-Hole Channels Mounting Bracket Installation Installing the DS-xxB2 Switch Placing the Switch Into the Rack/Cabinet Installing the Switch in the Rack/Cabinet M3 x 8-mm Pan Head Screw Tightening the Front and Rear Rail Assembly Screws Sales and Customer Service Contacts Where to Get Help EMC Departmental Switch DS-xxB2 Into Third-Party Racks