Thin Web Server | Connectivity Module Configuration |
4.When the process is done this message should appear. Click OK to continue. If message does not appear (wait), close the application and redo the process
again.
Other Utilities
How to Reset Thin Web Server Serially
1.Launch the Thin Web Server setup program and connect it to the Thin Web Server.
2.On the menu bar click Utilities, then click Request for
REBOOT.
3.Click Yes to continue or No to cancel operation.
How to Test Email Feature
1.Make sure the following information is already configured in the server.
-Outgoing Mail Server Email Address
-At least one receiving email address
-Originating Email Address
You can download configuration to confirm these settings in the server.
2.Launch the Thin Web Server setup program.
3.Connect to the Thin Web Server by clicking Communication, then Connect to Server. The indicator (bottom right corner) will turn green.
4.On menu bar click Utilities then TWS Email Tester.
5.Click Yes to continue or No to cancel. You must hear a series of ring sound coming from the TWS which indicates that the email was sent. Verify that the email went to the receiving email address.