LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES:

1.CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE_A,_V FUSE.

ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE_A,_V.

2.CAUTION:

Fixed Voltage (or Auto voltage selectable) power supply circuit is used in this unit.

If Main Fuse (F601) is blown, first check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the pow- er supply circuit to fail.

3.Note:

(1)Do not use the part number shown on the drawings for ordering. The correct part number is shown in the parts list, and may be slightly different or amended since the drawings were prepared.

(2)To maintain original function and reliability of repaired units, use only original replacement parts which are listed with their part numbers in the parts list section of the service manual.

4.Wire Connectors

(1)Prefix symbol "CN" means "connector" (can disconnect and reconnect).

(2)Prefix symbol "CL" means "wire-solder holes of the PCB" (wire is soldered directly).

5.Note: Mark "I" is a leadless (chip) component.

6.Voltage indications on the schematics are as shown below: Plug the TV power cord into a standard AC outlet.:

1

2

3

Power on mode

 

5.0

 

5.0

 

(3.0)

 

(3.0)

Power off mode

 

Voltage

 

Indicates that the voltage

Unit: Volts

 

 

 

 

 

 

 

is not consistent here.

 

7.How to read converged lines

1-D3

Distinction Area

Line Number (1 to 3 digits)

Examples:

1."1-D3" means that line number "1" goes to area "D3".

2."1-B1" means that line number "1" goes to area "B1".

3

AREA D3

1-B1

 

 

2

AREA B1

 

 

 

1

1-D3

 

 

 

 

 

A

B

C

D

8.Test Point Information

:Indicates a test point with a jumper wire across a hole in the PCB.

:Used to indicate a test point with a component lead on foil side.

:Used to indicate a test point with no test pin.

: Used to indicate a test point with a test pin.

7-2

L13SC

Page 27 Page 29
Page 28
Image 28
Emerson 6420FE service manual Wire Connectors, Is not consistent here, How to read converged lines, Test Point Information
Page 27 Page 29

6420FE specifications

The Emerson 6420FE is a robust and versatile platform designed for a variety of industrial applications, particularly in process automation, manufacturing, and control systems. This model represents Emerson’s commitment to innovation and performance, catering to the evolving needs of industries that require reliable and accurate control solutions.

One of the main features of the Emerson 6420FE is its advanced processing capability. Equipped with a high-performance processor, the device ensures fast data processing and response times, which are critical in real-time control environments. This allows organizations to optimize their processes, enhance productivity, and improve operational efficiency.

Connectivity is another standout characteristic of the Emerson 6420FE. It supports a range of communication protocols, including Ethernet/IP, Modbus, and others, enabling seamless integration with various devices and systems. This flexibility ensures that the 6420FE can be easily incorporated into existing networks, facilitating smooth data exchange and interoperability among different automation components.

In terms of safety, the Emerson 6420FE is designed with features that ensure compliance with industry standards. It includes built-in redundancy options that enhance operational reliability and minimize downtime. Moreover, the device undergoes rigorous testing to meet safety certifications, providing peace of mind to operators and stakeholders.

The user interface of the Emerson 6420FE is intuitive and user-friendly, featuring an easy-to-navigate design that simplifies configuration and operation. This is paired with advanced diagnostic capabilities, allowing operators to troubleshoot issues effectively and maintain optimal system performance without significant downtime.

Another notable aspect of the Emerson 6420FE is its scalability. Whether in a small application or a large-scale industrial environment, the device can be easily scaled to meet varying demands. This adaptability makes it an ideal solution for companies looking to future-proof their automation systems.

In conclusion, the Emerson 6420FE is a powerful and reliable device that embodies Emerson’s commitment to innovation in process control and automation. With its advanced processing power, versatile connectivity options, robust safety features, user-friendly interface, and scalability, it stands out as an excellent choice for industries looking to enhance their operational efficiencies and ensure streamlined processes. As technology continues to evolve, the Emerson 6420FE remains a cornerstone in automation solutions, driving productivity and reliability in various industrial applications.
Top Page Image Contents