Emerson 6420FE service manual Specifications, Description Condition Unit Nominal Limit, DBµv

SPECIFICATIONS

<TUNER>			ANT. Input ------------------- 75ohm Unbal., F type
			Reference Level ----------- 20Vp-p (CRT Green Cathode)
			Test Input Signal	---------- 400Hz 30% modulation
		Description		Condition	Unit	Nominal	Limit
	1.	Intermediate Freq.		Picture	MHz	45.75	-
				Sound	MHz	41.25	-
	2.	Peak Picture Sens		VHF	dBµv	15	30
				CATV	dBµv	15	30
				UHF	dBµv	15	40
	3.	AFT Pull In Range (10mV input)		-	MHz	±2.0	±0.7
<DEFLECTION>
		Description		Condition	Unit	Nominal	Limit
	1.	Deflection Freq.		Horizontal	KHz	15.734	-
				Vertical	Hz	60	-
	2.	Linearity		Horizontal	%	-	±15
				Vertical	%	-	±10
	3. Over Scan			-	%	10	-
	4. High Voltage			-	KV	29	-
<VIDEO & CHROMA>
		Description		Condition	Unit	Nominal	Limit
	1.	Misconvergence		Center	mm	-	0.4
				Side	mm	-	1.5
				Corner	mm	-	2.1
	2.	Brightness		APL 100%	Ft-L	25	15
	3.	Color Temperature		-	°K	9200°K	-
	4.	Resolution		Horizontal	Line	250	-
				Vertical	Line	300	-
<AUDIO>			All items are measured across 8Ω load at speaker output terminal.
		Description		Condition	Unit	Nominal	Limit
	1. Audio Output Power			10% THD	W	1	0.8
	2.	Audio Distortion (w/LPF)		500mW	%	2	7
	3.	Audio Freq. Response		-3dB	Hz	70~11K	-

Note:

Nominal specifications represent the design specifications. All units should be able to approximate these. Some will exceed and some may drop slightly below these specifications. Limit specifications represent the absolute worst condition that still might be considered acceptable. In no case should a unit fail to meet limit specifications.

1-1 L6200SP