BP7333 CF750 MAYA ZEN 12/22/06 7:59 AM Page 10
How to Wire
Your Ceiling Fan
If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a
3. Using wire connectors (supplied), make wiring connections as follows (Figure 18 and 19):
a.Connect the white fan wire and the white supply wire to the white receiver wire (AC IN N/MOTOR N).
licensed electrician.
!WARNING
Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.
CAUTION: To reduce the risk of electrical shock, disconnect the electrical supply circuit before installing the fan, light kit or receiver.
1. Pull the wire leads, coming from the end of the downrod, and the supply wires through the open side of the hanger bracket. (Figure 18).
2. Position the SW105 Receiver (supplied) in the ceiling cover so that the flat side of the receiver faces up and the open portion of the receiver is to the right, as shown in Figure 18.
b. Connect the black fan wire to the black receiver wire (TO MOTOR L).
c.Connect the black supply wire to the black/white receiver wire (AC IN L).
d.Connect the blue fan wire to the blue receiver wire (BOTTOM LIGHT).
e.Connect the yellow fan wire to the yellow receiver wire (UPPER LIGHT).
f.Connect the green ground wires from the hanger bracket and the hanger ball to the supply ground wire (bare or green).
HANGER BRACKET
HANGER BRACKET GROUND WIRE (GREEN)
HANGER BALL GROUND WIRE (GREEN)
OUTLET BOX
BLACK SUPPLY WIRE
BLACK FAN WIRE
BLACK/WHITE RECEIVER WIRE
BLUE FAN WIRE
BLUE RECEIVER
WIRE
| OPEN | |
| PORTION OF | |
| RECEIVER | |
SUPPLY GROUND | HERE | |
| ||
WIRE (GREEN OR | YELLOW FAN WIRE | |
BARE) | ||
YELLOW RECEIVER WIRE | ||
RECEIVER | ||
| ||
WHITE SUPPLY | BLACK RECEIVER WIRE | |
| ||
WIRE | WHITE RECEIVER WIRE | |
|
CEILING COVER | WHITE FAN WIRE |
Figure 18 | WIRE CONNECTOR |
10
