This Manual Is Designed to Make it as Easy as Possible for You to
Assemble, Install, Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
One Phillips head screwdriver
One stepladder
One wire stripper
MATERIALS
Wiring, outlet box and box connectors must be of type required by the local code. The minimum wire would be a
Installed Wire Length | Wire Size A.W.G. |
Up to 50 ft. | 14 |
12 |
WARNING
Before assembling your ceiling fan, refer to section on proper method of wiring your fan (page 6). If you feel you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician.
Unpacking Instructions
For your convenience,
! WARNING
Do not install or use fan if any part is damaged or missing. Call
1-800-654-3545
! WARNING
This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.
7.Four M5 external tooth lockwashers
8.Two
9.Two #8 external tooth lockwashers 10. Two
NOTE: Intermixing blades between fans can cause excessive wobble. Keep blades in original sets of three.
1.Unpack the items carefully to avoid damage to any of the components.
Check to see that you have received the following parts:
NOTE: If you are uncertain of part description, refer to the exploded view illustration.
a.Fan motor assembly
b.One ceiling cover
c.One coupling cover
d.One motor cover
e.Three fan blade assemblies
f.One hanger bracket
g.One hanger ball/downrod assembly
h.One SW46 wall control
i.One loose parts bag, containing:
1.One clevis pin
2.One hairpin clip
3.Three wire connectors
4.Seven M6 x 12mm pan head blade screws
5.Seven blade M6 lockwashers
6.Four M5 x 10mm pan head screws
a
h
d
g
4
3
2
1
0
b c
f
i
e
3 | U.L. Model No.: CF765 |