Using Your Ceiling Fan
4
3
2
1
0
Figure 15
IMPORTANT
Fan installation must be completed, including the installation of the fan blades, before testing of the controls.
1.Restore electrical power to the outlet box by turning the electricity on at the main fuse box.
2.Check the operation of the fan by sliding the bar of the control through the four positions marked 1 - 4 (“0” position is OFF) (Figure 15).
3.All fans are shipped from the factory with the reversing switch positioned to circulate air downward. If airflow is desired in opposite direction, turn your fan OFF and wait for the blades to stop turning, then slide the reversing switch to the opposite position, and turn fan on again (Figure 16).
4.The fan blades will turn in the opposite direction and reverse the airflow.
Reverse Switch Information
Season | Rotation Direction | Switch Position |
Summer | Down | |
Winter | Clockwise | Up |
REVERSIBLE
SWITCH
Figure 16
Maintenance
IMPORTANT CARE INSTRUCTIONS
for your Ceiling Fan
Periodic cleaning of your new ceiling fan is the only maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish.
Abrasive cleaning agents are not required and should be avoided to prevent damage to finish.
WARNING
Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility of an electrical shock.
Accessories
1.Ceiling Fan Controls (see store or catalog).
2.Downrod Extension Kits (see store or catalog).
WARNING
The use of any other control not specifically approved for this fan could result in fire, shock and personal injury.
WARNING
This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.
8 | U.L. Model No.: CF765 |
