BP7335 Palazzo 1/9/07 9:05 AM Page 14
Operating Your
Ceiling Fan
IMPORTANT
Fan installation must be completed, including the installation of the fan blades, before testing of the remote control.
Your Fan/Light Wall Control (Figure 26) has full control of your fan and light. However, airflow direction is controlled by a slide switch on the switch housing.
5. To turn the light on and off, press and release the LIGHT button. The light will turn on at the light level previously set (see step 4).
HI
LIGHT
1. Restore electrical power to the outlet box by turning the electricity on at the service panel.
NOTE: Make sure that the ON/OFF slide switch on the Fan/Light Wall Control is in the ON position.
2. To set the desired fan speed, press the HI, MED, or LOW buttons to operate your fan on high, medium, or low speed (Figure 26).
3. To turn your fan off, press the OFF button.
4. To set the level of light brightness, Figure 26 press and hold the LIGHT button. The
light brightness will continue to increase then decrease while the button is held down. When the light is at the desired brightness, release the button.
MED
LOW
FAN OFF
EMERSON®
OFF | ON |
14
