How to Wire Your Ceiling Fan (continued)
4.Push the wires and connectors up into the outlet box while inserting the receiver fully into the hanger bracket. Position the antenna wire on top of the receiver.
5.Screw the two threaded studs (supplied) into the tapped holes in the hanger bracket.
6.Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the ceiling cover (Figure 17).
7.Secure the ceiling cover in place by sliding
! WARNING
To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.
Figure 17
CEILING COVER
THREADED STUDS (2)
LOCKWASHERS (2)
KNURLED KNOBS (2)
Installation of Lower Light Glass
1.Screw two
2.Unscrew the finial nut from the light kit assembly threaded nipple (Figure 18).
3.Position the glass shade over the threaded nipple on the light kit assembly.
4.Reinstall the finial nut onto the threaded nipple.
NOTE: Periodically check that the glass bowl is seated correctly in the light kit assembly and the finial nut is securely fastened.
5.Assembly of the ceiling fan is now complete. Restore electrical power to the branch circuit at the fuse box or breaker panel.
LIGHT SOCKET (2)
Figure 18
HALOGEN LIGHT BULB (2)
THREADED
NIPPLE
GLASS SHADE
FINIAL NUT
REVERSING | MOTOR | |
HOUSING | ||
SWITCH | ||
|
Figure 19
10 | Model No.: CF990 |