Emerson CF990VNB00 Unpacking Instructions, Install, Operate and Maintain Your Ceiling Fan

This Manual Is Designed to Make it as Easy as Possible for You to Assemble,

Install, Operate and Maintain Your Ceiling Fan

Tools Needed for Assembly

One Phillips head screwdriver	One stepladder
One 1/4” blade screwdriver	One wire stripper

MATERIALS

Wiring outlet box and box connectors must be of type required by the local code. The minimum wire would be a 3-conductor (2-wire with ground) of the following size:

Installed Wire Length	Wire Size A.W.G.
Up to 50 ft.	14
50-100 ft.	12

! WARNING

Before assembly your ceiling fan, refer to section on proper method of wiring your fan (page 8). If you feel you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician.

Unpacking Instructions

! WARNING

Do not install or use fan if any part is damaged or missing. Call Toll-Free:

1-800-654-3545

! WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.

1.Check to see that you have received the following parts:

NOTE: If you are uncertain of part description, refer to exploded view illustration.

a.Fan motor assembly

b.One ceiling cover

c.One coupling cover

d.Five fan blades

e.Five fan blades flanges

f.Five blade medallions

g.One lower housing

h.One light kit assembly including one finial nut

i.One lower glass

j.Two 50-watt mini candelabra halogen light bulbs

k.One hanger bracket

l.One hanger ball/4.5” downrod assembly

m.One receiver and 4-speed hand control

n.One loose parts bag containing:

1.One clevis pin

2.One hairpin clip

3.Three 12 ga. wire connectors

4.Two #8-32 x 1-1/4” threaded studs

5.Two #8 external tooth lockwashers

6.Two #8-32 knurled knobs

7.Sixteen #10-32 x 12.3mm washer head screws

8.Eleven 1/4” x 1/2” round head lock tie flange screws

9.One #8-32 x 10mm pan head screw

10.One balancing kit

NOTE: Place the parts from the loose parts bags in a small container to keep them from being lost. If any parts are missing, contact your local retailer or catalog outlet for replacement before proceeding.

2.Remove the fan motor assembly from the protective plastic bag. Place all carton contents on a protective surface.

A. FAN MOTOR
ASSEMBLY
B. CEILING
COVER
	C. COUPLING
	COVER
	D. FAN
	BLADES
E. FAN	F. FLANGE
BLADE	MEDALLIONS
FLANGES
G. LOWER	H. LIGHT KIT
HOUSING
	ASSEMBLY
I. LOWER	J. LIGHT
GLASS	BULBS
K. HANGER	L. HANGER BALL/
	4.5" DOWNROD
BRACKET	ASSEMBLY
	N. LOOSE
M. FAN/LIGHT	PARTS BAG
REMOTE
CONTROL/
RECEIVER

3 Model No.: CF990