How to Put Your Ceiling Fan Together (continued)
8.Remove and discard the four rubber shipping retainers securing the motor hub in the motor housing assembly (Figure 6).
9.Position one blade medallion onto the blade. Place the blade flange to the other side of the blade to secure the medallion and blade to the flange. Mount the medallion, fan blade, and blade flange using the three
10.Slide the blade assembly into the housing slot. Attach the blade assembly using two 1/4” x 1/2” round head lock tie flange screws. Attach the remaining four blades (Figure 8).
NOTE: Take care not to scratch fan housing when installing blades.
RUBBER
SHIPPING
RETAINERS
MOTOR
HOUSING
ASSEMBLY
Figure 6
BLADE
MEDALLION
FAN BLADE
BLADE
FLANGE
Figure 7
1/4" x 1/2" ROUND HEAD LOCK TIE FLANGE SCREWS (2)
BLADE ASSEMBLY
Figure 8
6 | Model No.: CF990 |