Listening To The Radio
Digital Radio Frequency Display
This clock radio features a digital radio frequency display instead of a dial scale to make tuning easier, especially in a dark room. The jumbo LED time display automatically changes to a radio frequency display as soon as you begin turning the TUN. (Tuning) control. And the display automatically changes back to the correct time within 10 seconds after you release the TUN. (Tuning) control.
1.) Set the Band FM/AM selector switch to the desired band, AM or FM.
2.) Set the VOL. (Volume) control to a low setting.
3.) Press the 
RADIO ON/OFF button to turn the radio ‘On’. The display changes from time to an AM or FM radio frequency display.
4.) Turn the TUN. (Tuning) control
Important: It is not necessary to tune to the exact frequency of your desired station. Just rotate the TUN. (Tuning) control until you find the strongest signal and the best reception, even if the frequency number on the display is higher or lower than the actual station frequency.
Within 10 seconds after you release the TUN. (Tuning) control the display automatically changes back to the correct time.
5.) Adjust the VOL. (Volume) control to the desired setting.
6.) When you are finished listening, press the 
RADIO ON/OFF button to turn the radio ‘Off’.
16
CKS3095_041707.p65 | 16 |
17/4/2007, 16:06
