Care and M Aintenance

Removal And Proper Disposal of Exhausted Batteries

1.) (a.) Insert the end of a straightened

	paper-clip, toothpick, or similar	b
	paper-clip, toothpick, or similar
	device into the small hole on the end
	cap to depress the locking tab and	a
	release the cap.	a
	release the cap.

(b.) Remove the cap completely.

2.) Slide the exhausted battery out of the flashlight.

Caution:

Exhausted Ni-Cd battery must be disposed of properly.

Call 1-800-822-8837for recycling information.

Do not dispose of battery in fire.

3.) Insert the fresh battery into the flashlight as shown.

	4.) (a.) Turn the end cap until the arrow
	mark on the end cap is aligned with	a
	the arrow mark on the flashlight	b
	body.	b
	body.

(b.) Replace the end cap by pushing it on to the flashlight body until it locks in place.

IMPORTANT: after installing a fresh battery the flashlight should be recharged for 24 hours before initial use.

17/4/2007, 16:06