Listening To The Radio
1.) Press the 
POWER button on the main unit or remote control to turn the system ‘On’. The Standby indicator goes off.
If necessary, press the FUNCTION button to select the Radio mode and the display shows:
FM 87.5 MHz.
To switch between FM and AM bands press the
BAND button on the front panel or remote.
2.) Tune to the desired station as follows:
•Automatic Tuning - Depress and hold the 
or 
buttons until the display begins to move, then release the buttons. The tuner will scan up or down the band until it finds the first strong station, and then stop on that station. Repeat this process until the tuner stops on your desired station.
If you tune to an FM Stereo station the “(ST)” indicator appears in the display.
•Manual Tuning - Press the 
or 
buttons repeatedly until the display is showing the frequency of your desired station. Use the manual tuning method to tune to weaker stations that are bypassed during Automatic Tuning.
3.) Press the VOLUME 
or 
buttons to adjust the volume to the desired level.
4.) When you are finished listening press the 
POWER button to shut the system ‘Off’. The main display lighting goes off, the Standby indicator comes on, and the display returns to the correct time.
Last Station Memory
The system remembers the last station you were listening to before the power is switched off and automatically returns to that same station when the power is switched on again.
14
ES128_042806.p65 | 14 |
28/4/2006, 11:39
