PREPARATION FOR USE
Unpacking And Set Up
•Remove the main unit, the speakers, and the remote control unit from the display carton. Remove all packing materials from the components. We recommend that you save the original carton and packing material if possible, in the event that your system even needs to be returned for service. Using the original carton and packing materials is the only way to protect your system from shipping damage.
•Press on the CD door in the area marked OPEN/CLOSE to open the door. Remove the “dummy CD” transit protection card from the CD player and discard it.
•Unwind the AC power cord and extend it to its full length.
•Unwind the external FM wire antenna and extend it to its full length.
•Remove the
Placement of the System
The system should be placed on a stable, level surface such as a table, desk, or shelf, convenient to an AC outlet, away from direct sunlight, and sources of excess heat, dust, moisture, humidity, vibration, or strong magnetic fields.
The speakers may be placed next to the main unit or as far apart as the speaker wires allow. We recommend that you leave a gap of approximately 1/2 inch between the main unit and the speakers so that any vibration from the speakers will not interfere with the CD player in the main unit.
4
ES128_042806.p65 | 4 |
28/4/2006, 11:39
