6.) Repeat Step 5 until you have stored up to 20 tracks in the CD program memory. You may program the same track to play more than once if desired.
When you have fully loaded the memory with 20 tracks, two flashing dashes (“ – – “) will appear in the track number display.
7.) Press the 
PLAY/PAUSE button to begin programmed playback.
The MEMORY indicator stops flashing and remains ‘On’. The tracks that you selected will play in the order in which they were programmed.
When the last programmed track has played the player stops and the display again shows the total tracks on the disc. However, the program sequence remains in the memory.
To play the program sequence again first press the PROGRAM/MEM./CLK. ADJ button on the front panel or the PROG. button on the remote control, then
press the 
PLAY/PAUSE button.
8.) To clear the program sequence from the memory at any time, press the 
STOP button to stop the disc if necessary, then first press the PROGRAM/MEM./CLK. ADJ button, and press the 
STOP button once more.
The program sequence will also be cleared from the memory when you open the CD door.
23
ES128_042806.p65 | 23 |
28/4/2006, 11:39
