Programmed Playback
This feature allows you to program up to 20 tracks on a disc to play in any desired order.
NOTE: You cannot program the CD player while a disc is playing. You must press the 
STOP button to stop the disc before performing the program steps below.
1.) Load the disc as usual and wait until the display shows the total number of tracks.
2.) Press the PROGRAM/MEM./CLK. ADJ button on the front panel or the PROG. button on the remote control. The MEMORY indicator begins flashing in the display.
The Program Memory Number “P01” appears briefly then the track number “00” flashes.
3.) Press the 
or 
buttons to select the first track number you wish to program.
Example: Track 03.
4.) When the desired track number is flashing in the display press the PROGRAM/MEM./CLK. ADJ button again to enter that track in Program Memory Number “P01”. The track number display returns to “00”.
5.) Select the next track to be programmed and when the desired track number is flashing in the display press the PROGRAM/MEM./CLK. ADJ button to store that track number in Program Memory Number “P02”.
22
ES128_042806.p65 | 22 |
28/4/2006, 11:39
