PICTURE CONTROL
TV
The unit’s picture controls – BRIGHT, CON- TRAST, COLOR, TINT and SHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image.
Make sure ...
•The unit must be turned on.
1Select “PICTURE CONTROL”
Hit [PICTURE].
2Select item you want to adjust
Press [K / L] until desired control is displayed.
BRIGHT CONTRAST COLOR
TINT
BRIGHT
SLEEP TIMER
TV
The Sleep Timer function turns off the unit without using [POWER] after a desired period of time.
1Call up the Sleep Timer Setting
Hit [SLEEP] so that “SLEEP TIMER” appears.
2Set sleep time
Hit [SLEEP] repeatedly until your desired sleep time appears.
Each additional hit will increase the time by 30 minutes up to 120 min- utes.
After 5 seconds, the Sleep Timer
SLEEP 120 MINUTES
setting will disappear automatically.
NOTE:
SHARPNESS
– P P P P P P P C P P P P P P P +
• When you disconnect the unit from the AC outlet, |
or if you have a power failure, the sleep time will |
3Adjust the picture control
Press [s / B] to adjust to your desired level within
5seconds.
NOTE:
• At step 3, the picture adjustment display will dis- appear from the TV screen after about 5 seconds unless you press any buttons, even though you may not be finished. In this case, repeat from step 1.
| s | B |
|
|
|
BRIGHT | to decrease | to increase |
| brightness | brightness |
|
|
|
CONTRAST | to decrease | to increase |
| contrast | contrast |
|
|
|
COLOR | to pale | to brilliant |
|
|
|
TINT | to purple | to green |
|
|
|
SHARPNESS | to soft | to clear |
•If there is a power failure of any kind, the unit will retain its memory for this feature.
DEGAUSSING
TV
be lost. |
• To confirm the time left for sleep timer, hit |
[SLEEP] once and the display appears for 10 sec- |
onds. |
TO CANCEL THE SLEEP TIMER
Hit [SLEEP] to call up the Sleep Timer Setting. Hit [SLEEP] repeatedly until “SLEEP 0 MINUTES” appears.
This television has a degaussing circuit that will clear |
|
up color errors on the TV screen that are caused by |
|
any excess magnetism which happens to get too close |
|
to the TV. This circuit is designed to operate once |
|
when the set is first plugged in. If minor color |
|
errors are seen in some locations on the screen, |
|
please unplug the TV for approximately 30 min- |
|
utes. When the TV is plugged back in, the degauss- |
|
ing circuit will operate once to clear them up. Repeat |
|
this procedure any time the TV screen is accidentally |
|
magnetized or when the TV is moved or relocated. | EN |
– 15 – |
