CHANNEL RESETTING
TV
Make sure ...
•The unit power must be turned on.
RESETTING CHANNELS
1Select “CHANNEL SET UP”
Hit [SETUP] on the remote control. | - TV SETUP - |
Press [K / L] to point to “CHAN- B CHANNEL SET UP
ADDING/DELETING CHANNELS
The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)
1 Select “CHANNEL SET UP”
Hit [SETUP]. | - TV SETUP - | |
Press [K / L] to point to “CHAN- | B CHANNEL SET UP | |
NEL SET UP”, then hit [ENTER]. | ||
LANGUAGE [ENGLISH] | ||
|
NEL SET UP”, then hit [ENTER].
2Begin auto preset
LANGUAGE [ENGLISH]
2Select “ADD/DELETE CH”
Press [K / L] to point to | – CHANNEL SET UP – |
“ADD/DELETE CH”, then hit | B ADD / DELETE CH (TV) |
[ENTER]. | AUTO PRESET |
Press [K / L] to point to “AUTO PRESET”, then hit [ENTER].
The tuner scans and memorizes all the active chan- nels in your area.
NOTES:
•The unit distinguishes between standard TV chan- nels and cable(CATV) channels.
• The unit may memorize TV chan- nels as CATV channels if recep- tion conditions is poor. If this happens, try “AUTO PRESET” action again when reception con- ditions are better.
3After scanning
The tuner stops on the lowest memorized channel.
3Enter the desired channel number
Press [K / L] until your desired channel number appears (You can
also use the Number buttons or | 08 |
[CH. K / L] to enter it). | ADD / DELETE |
| (Example: CH8) |
4Delete (or add) it from (into) memory
Hit [ENTER]. The channel number changes to light red. The channel is deleted from memory.
Added channel: Light blue.
Deleted channel: Light red.
•To delete another channel, repeat steps 3 and 4.
•If you hit [ENTER] again, the channel is memo- rized again.
5Exit the channel setup mode
Hit [SETUP] to exit the menu.
NOTE:
•To confirm that channel(s) has been deleted or added, hit [CH. K / L].
– 16 – | EN |
