![](/images/new-backgrounds/1157789/15778925x1.webp)
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a DOLBY DIGITAL Data stream from its COAXIAL jack. By hooking the unit up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and
Use audio coaxial digital cables (commercially available) for the audio connections.
Center speaker
Front speaker | Front speaker |
(left) | (right) |
Dolby Digital decoder
Surround
speaker (left)
(IN) | To Coaxial digital | (OUT) |
| |
Audio input jack | COAXIAL | |||
| Audio coaxial |
| ||
Surround | Subwoofer digital cable | To COAXIAL jack | ||
speaker | (commercially | |||
(right) | (Only DVD AUDIO OUT) | |||
available) | ||||
|
|
[Fig. 8]
NOTES:
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner’s Manuals for the components to be connected to the unit.
•If connected to a Dolby Digital decoder, set DOLBY DIGITAL to “ON” for audio output in the setup mode. (Refer to page 27 to set DOLBY DIGITAL to “ON”.)
•Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to “OFF” for audio output in the setup mode. Playing a unit using incorrect settings may generate noise distortion, and may also damage the speak- ers.
Manufactured under license from Dolby Laboratories. “Dolby” and the
– 13 – | EN |