Press to switch to TV/VCR mode. TV/VCR indi- cator on the front will lights on.
46.ANT. in jack
Connect to an antenna, cable system, or satellite system.
47.Power cord
Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect to a standard AC outlet.
48.COAXIAL digital audio out jack
Connect to the digital input of an external amplifier or decoder.
49.AUDIO L/R output jack
Connect to the analog audio input of an external amplifier or decoder.
PREPARATION FOR USE
ANTENNA/CABLE CONNECTION
Satellite Box or
Cable Box (Not supplied)
OUT
IN
| |
From Cable | Coaxial |
System | Cable |
| (Not sup- |
| plied) |
From Cable System or Satellite Dish
or
ANT. | 1 |
VHF/UHF Antenna (Not supplied)
VHF Antenna (Not supplied)
UHF Antenna (Not supplied)
VHF/UHF
Combiner (Not supplied)
ANT. | ||
or | ||
Cable (Not | ||
| ||
supplied) | or | |
|
[Fig. 4]
Flat
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.
CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/DVD/VHS without a converter box.
By using this connection you can:
1)Use the TV/DVD/VHS remote to select channels.
2)Program one or more unscrambled channels for Automatic Timer Recording.
CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration.
By using this connection you can also record scram- bled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/DVD/VHS Remote Control. Unattended timer recording is limited to one channel at a time.
NOTE: This unit will ONLY record and view the same channel.
- 11 -
Antenna/Cable Connections Continued on the Next Page.
EN
1C29
