![](/images/new-backgrounds/1305841/30584137x1.webp)
TV OPERATION
WATCHING A TV PROGRAM
1Turn on the TV/DVD/VHS
Press the POWER button to turn on the
TV/DVD/VHS.
2Select the channel number
Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control.
Remember: If the TV/DVD/VHS is connected to a cable box or satellite box, the TV/DVD/VHS must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
3Adjust sound
Press the VOLUME X or Y button to adjust the volume.
VOLUME 20
C C C C C C C C C C C C
NOTES:
•If you press the CHANNEL o or pin the DVD mode, you can change the TV channels.
Even if you turn off the TV/DVD/VHS in the DVD mode, when you turn it on again, it will go into the TV/VCR mode.
DEGAUSSING
Magnetism from nearby appliances might affect the color of the TV picture.
If this happens, move this unit away from the appli- ance. If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes.
PICTURE CONTROL
The TV/DVD/VHS’s picture controls – BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image.
NOTES:
•Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled.
•When setting the Picture Control, the Game mode will be cancelled.
Make sure ...
•TV/DVD/VHS power must be turned on.
1Select “PICTURE CONTROL”
Press the PICTURE button on the remote control.
2Select item you want to adjust
Press the Arrow K or L button until desired control is displayed.
BRIGHT CONTRAST COLOR
TINT | BRIGHT |
– P P P P P P P C P P P P P P P + | |
SHARPNESS |
|
3Adjust the picture control
Press the Arrow B or s button to adjust to your desired level.
| Arrow s | Arrow B |
|
|
|
BRIGHT | to decrease | to increase |
| brightness | brightness |
|
|
|
CONTRAST | to decrease | to increase |
| contrast | contrast |
|
|
|
COLOR | to pale | to brilliant |
|
|
|
TINT | to purple | to green |
|
|
|
SHARPNESS | to soft | to clear |
|
|
|
•If there is a power failure of any kind, the unit will retain its memory for this feature.
- 19 - | EN |
1C29