Emerson iP500 owner manual Care Of The Cabinet, Keeping The Docking Station Free of Dust

CARE AND MAINTENANCE

Care Of The Cabinet

If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax, polish sprays, or abrasive cleaners on the cabinet.

Caution

Never allow any water or other liquids to get inside the unit while cleaning.

Keeping The Docking Station Free of Dust

One of the 6 adapters supplied with this system is just a flat cover with no opening for the 30-pin connector. If you will not be using your iPod® in this system for more than a few days we recommend that you insert this flat cover in the cradle to keep the iPod® connector free of dust and other foreign objects. Insert this cover into the cradle as you would with any other adapter. When its time to remove this cover, lift the cradle out of the docking station as usual and push up on the cover from the bottom of the cradle.

Resetting the System After a Power Surge

If the system locks up and does not respond when you operate any of the controls you may have experienced a sudden power surge that triggered the overload protection circuit. Refer to the “Reset Button” instructions on page 9.

41

iP500_042307.p65 41

23/4/2007, 17:01