Emerson iP500 owner manual Connecting and Playing Your ‘Dockable’ iPod

Connecting and Playing Your ‘Dockable’ iPod®

(Refer To Separate Instructions For The iPod® Shuffle)

IMPORTANT: To avoid any unwanted distortion when listening to your iPod® through the speakers of this system we recommend that you shut off the equalizer in the iPod® before inserting it in the docking station of this system. To shut off the iPod® equalizer, go to the “Main Menu” in your iPod® , scroll to the “Settings” menu, select the “EQ” setting and turn the EQ ‘Off’.

1.) The Hold switch on your iPod® should be set to the ‘Off’position to unlock the click-wheel navigation controls.

2.) Remove the docking cradle from the front panel by sliding the cradle upward as shown. If you have not already done so turn the cradle over and press on the bottom of the connector cover to remove it from the cradle. Discard the paper “dummy iPod® ”.

3.Choose the appropriate adapter for your particular iPod® model from among the 6 adapters supplied with this system and insert the adapter into the docking cradle as shown. (Refer to the iPod adapter chart).

Then re-install the docking cradle in the front panel.

26

iP500_042307.p65 26

23/4/2007, 17:00