Emerson iP500 owner manual Stereo Headphone Jack

Models: iP500

1 44
Download 44 pages 32.78 Kb
Page 35
Image 35

4.) You should hear the sound from your external source through the speakers of this system.

NOTE: If you connected the Line Out jack of your external source then you only need to adjust the Volume control of this system. If you connected the headphone jack of your external source then you may need to adjust both the volume control of your external source and the Volume control of this system to find the most desirable volume setting.

5.) When you are finished listening press the Power button of this system to turn the power ‘Off’. Don't forget to switch off the power to your external source as well.

NOTE: It is not necessary to disconnect your external source from the AUX IN jack of this system.

Stereo Headphone Jack

This system includes a 3.5mm mini PHONES (stereo headphone) jack on the back panel so that you can listen privately without disturbing others. When the headphone (not included) is connected to the PHONES jack of this system the internal speakers are automatically shut ‘Off’.

IMPORTANT! Before you put on your headphones please reduce the Volume control of this system to a low level. Then put your headphones on and gradually increase the volume to a comfortable listening level. Remember that digital music files can contain both very soft and very loud passages. You should adjust the Volume control to a comfortable level while listening to a louder passage so that you will not experience any discomfort caused by any sudden increase in volume level.

The headphones must be disconnected from the PHONES jack in order to listen to the internal speakers again.

34

iP500_042307.p65

34

23/4/2007, 17:01

Page 35
Image 35
Emerson iP500 owner manual Stereo Headphone Jack