CD operation
Playing all discs
1. Load the discs as shown earlier.
Note that discs will be played in order. If you don't want to start with disc 1 press CD / SELECT to select 2 or 3 (indicated at the left of the front panel display).
2. Press 
to start play.
To select tracks or pause, stop, etc, use buttons 
,
,
and 
(see page 11).
For repeat and random play, see previous page.
Playing a programmed selection of tracks
You can program the unit to play a selection of tracks from the discs loaded. (Up to 40 tracks can be programmed.)
Note you can abandon programming at any time by pressing 
.
1. Load the disc(s).
Note – When you press PROG to start programming, the front panel will display p - 0 1 - this means programmed track 1.
Note that TRACK 0 0 flashing next to P - 0 1 is telling you to enter the CD and track number for programmed track 1.
2. | Press PROG. |
3. | Press CD / SELECT to select disc 1 or 2 or 3 (on the front |
| panel display). |
13
