Emerson MS3100 Selecting stored radio stations, FM mono/stereo, Time display, MEMs, MEMt, Mode

Radio operation

3.Press MEMORY followed by MEMs or MEMt so that the memory number flashes to the left of the frequency, for example:

MEMORY CH 02 89. 1 MHz FM. After a few seconds the flashing stops and the memory number is set.

Note-Instead of using MEMs and MEMt you can use the number keys on the remote. In the above example, you would press MEMORY followed by 2.

Note after pressing MEMORY you must enter a memory number within 5 seconds, otherwise the number will not be stored.

Selecting stored radio stations

1. Press BAND to select required band.

2. Press

MEMs

or

MEMt

to select required memory number.

Alternatively, you can use the number keys on the remote.

Examples: For memory 7, simply press 7.

For memory 14, press + 10 then 4.

For memory 20, press + 10 twice then 0.

FM mono/stereo

You can set FM radio stations to mono (for example if FM stereo reception is noisy). To switch between FM mono and stereo, lower the front panel flap and press FM MONO/STEREO.

Time display

To display the current time, press

MODE

once.

Note–pressingMODE repeatedly also displays any TIMER ON and TIMER OFF settings. These are explained on the next page.

19