Emerson MS3100 owner manual Timer operation

Timer operation

Timer operation

The timer function allows you to set the unit to switch itself on and off automatically, for example, to wake you up each morning.

While setting up the timer, make sure you carry out each step within five seconds, otherwise your entry will not be accepted in the memory and you will have to start again.

Note-During timer setup, always check the AM/PM indicator (to the left of the time) to ensure you make the correct settings.

1.Select the radio station or CD you wish to play when the unit switches on. (For CD this can be a programmed selection of tracks if desired.)

2.Press MODE repeatedly until TIMER ON flashes at the right of the display, then press MEMORY immediately.

The timer on (hour setting) will flash.

3.Immediately press + or - to set the hour, then press MEMORY . The minute setting will flash.

4.Immediately press + or - to set the minute, then press MEMORY .

5.Press MODE repeatedly until display, then press MEMORY

TIMER OFF flashes at the right of the immediately.

The timer off (hour setting) will flash.

6.Immediately press + or - to set the hour, then press MEMORY . The minute setting will flash.

7.Immediately press + or - to set the minute, then press MEMORY .

20