CD operation
To eject, simply open the CD door using and remove the disc. Note there's a cutout to the left of each player so that you can place your finger under the edge of the disc to remove it.
Playing one disc
1.Load the disc as previously shown.
2.Press one of the three buttons below the disc you wish to play:
(Alternatively, press one of the CD buttons on the remote.)
The number of the disc playing ( 1 or 2 or 3 ) is indicated at the left of the front panel display.
Selecting tracks
To change track while a disc is playing, press and release or .
Alternatively, you can pick a track number directly using buttons 1 to 9 on the remote.
If the required track number is higher than 9, use the +10 button.
Examples: To select track 10 press +10 then 0.
To select track 23 press +10 twice then 3.
11