·Go to the line you want with the − -key or the ↓ -key.

·Select the tag of the channel with the 8 -key or the → -key:

The display will go back to the menu "Analog Outputs" automatically. The tag of the channel selected will appear in the line "Source module".

3)Select any signal:

·Change to the line "Choose signal" with the ↓ -key.

·Press the 8 -key or the → -key to change to the submenu "Signals":

TAG

95.00 ppm

-- Signals --

Concentration

Average

Minimum

Maximum

Temperature

Pressure

Flow

Calculator-1

Measure

 

<<<

Back...

>>>

F1

F2

F3

F4

F5

Available signals on further menu pages:

¨Calculator-2

¨Calculator-3

¨Calculator-4

¨Failures

¨Maintenance-Requests

¨Function-Control

¨Range-ID

¨Operation

¨Any_Alarms

¨Span-Conc.

¨Gasflow

·Go to the line you want with the ↓ -key or the − -key. With the F5 key (>>>) you can go to further menu pages containing signals. With the F4 key you can go back to the menu "Analog Outputs".

·Select the signal with the 8 -key or the → -key:

The display will go back to the menu "Analog Outputs" automatically. The signal selected will appear in the line "Signal name".

5 - 86

NGA 2000

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98