MLT25/CH2/R2

95.00 ppm

-- Analyzer Modules --

Control Module

MLT25/CH1

MLT25/CH2

MLT25/CH3

MLT25/CH4

MLT25/CH5

Measure

 

<<<

Back...

>>>

F1

F2

F3

F4

F5

3)Select any signal:

·Change to the line "Choose signal..." with the ↓ -key.

·Press the 8 -key or the → -key to change to the submenu "Signals":

TAG

95.00 ppm

-- Signals --

Function control

Maintenance request

Failure

Cal. in progress

Zero in progress

Span in progress

Zero failed

Span failed

Measure

 

<<<

Back...

>>>

F1

F2

F3

F4

F5

·Go to the line you want with the ↓ -key or the − -key. With the F5 key (>>>) you can go to other menu pages containing further available signals:

„Range overflow

„Range underflow

„Flow too low

„Flow too high

„and further signals, if need be:

All signals of the control module and of the analyzer modules joint to the platform or MLT analyzer (e.g. CLD, FID, MLT AM) are available in the menu "Signals".

·Select the signal with the 8 -key or the → -key:

The display will go back to the menu "Relay Outputs" automatically. The signal selected will appear in the line "Signal name".

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98

NGA 2000

5 - 91