7)Fine adjustment of the analog output:

·If you press the F5 key in the menu "Analog Outputs" you can change to the submenu "Fine Adjustment", where you can do the fine adjustments of the analog output:

TAG

 

 

 

95.00 ppm

 

 

-- Fine Adjustment --

 

Output number:

 

 

1

Operation mode:

 

 

Normal

Fine adjustment for 0% output:

 

4097

Fine adjustment for 100% output:

 

799

Measure

Updates

Back...

 

F1

F2

F3

F4

F5

·In the line "Output number" appears the output number selected in the menu "Analog Outputs". If you want, you can select another output in the submenu "Fine Adjustment":

„Press the 8 -key or the → -key to select the output number and adjust the value you want with the − -key or the ↓ -key. Options: 1, ... , 8.

„Confirm the number selected with the 8 -key.

Fine adjustment setup of the analog output:

·Press the 8 -key or the → -key in the line "Operation mode" to select the parameter and adjust one of the following parameters with the − -key or the ↓ -key:

„Normal: The absolute measurement signal will be sent to the analog output.

„Adjust 0V: Coordination between the display and the analog output for 0V with fine adjustment 0%.

„Adjust 10V: Coordination between the display and the analog output for 10V with fine adjustment 100%.

·Confirm the new parameter with the 8 -key.

·Change to the following lines with the − -key or the ↓ -key.

·Press the 8 -key or the → -key in the line "Fine adjustment for 0% output" or "Fine adjustment for 100% output" to select the corresponding value.

·Adjust the value you want with the − -key or the ↓ -key and confirm it with the 8 -key. Options: 3500 - 4800 for 0% and 750 - 900 for 100%.

F2 key (Updates):

·With the F2 key you can change to the submenu "Analog Output Updates per Second".

The last three lines of variables in the menu "Analog Outputs" only display some values of the analog output! They are not available.

5 - 88

NGA 2000

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98