FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result

causing property damage, personal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electrical switch;

do not use any phone in your building.

•Immediately call your gas supplier from a neigh- bor's phone. Follow the gas supplier's instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don't try to repair it; call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service techni- cian to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

1.STOP! Read the safety information above.

2.Set the thermostat to lowest setting.

3.Turn off all electric power to the appliance (if appli- cable).

4.Lower valve cover.

5.Push in gas control knob slightly and turn clockwise to "OFF".

6.Wait ten (10) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information above. If you don't smell gas, go to the next step.

7.Find pilot - The pilot is attached to the main burner behind the front log.

8.Turn knob on gas control counterclockwise to "PILOT."

9.Push in gas control knob all the way and hold in. Repeatedly push the piezo ignitor button until pilot is lit. Continue to hold the control knob in for about one (1) minute after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 5 through 9.

•If knob does not pop up when released, stop and immediately call your service technician or gas supplier.

•If the pilot will not stay lit after several tries, turn the gas control knob to "OFF" and call your service technician or gas supplier.

10.Turn gas control knob counterclockwise to "ON".

11.Raise valve cover.

12.Turn on all electric power to the appliance (if appli- cable).

13. Set thermostat to desired setting.

TO TURN OFF GAS TO APPLIANCE

1.Set the thermostat to lowest setting.

2.Turn off all electric power to appliance if service is to be performed (if applicable).

3.Lower valve cover.

4.Push in gas control knob slightly and turn clock-

wise to "OFF". Do not force.

5.Raise valve cover.

R-3450

Page 15

Page 14 Page 16
Page 15
Image 15
Empire Comfort Systems CIBV-30-2 installation instructions For Your Safety Read Before Lighting
Page 14 Page 16

CIBV-30-2 specifications

Empire Comfort Systems has long been a trusted name in the heating industry, providing reliable and efficient heating solutions for homes. One of their standout products is the CIBV-30-2 direct vent gas fireplace, which combines modern technology with aesthetic appeal.

The CIBV-30-2 is designed to deliver warmth and charm to any space while ensuring maximum efficiency. With a compact design, this model is perfect for smaller rooms or areas where space is at a premium. Its direct vent technology allows for the safe exhaust of combustion gases, which enhances indoor air quality. This feature makes the CIBV-30-2 an excellent choice for homeowners looking to enjoy the comfort of a fireplace without the concerns associated with traditional wood-burning options.

One of the key characteristics of the CIBV-30-2 is its capability to provide a steady heat output of up to 30,000 BTUs, ensuring that even the coldest days feel cozy. The fireplace operates on either natural gas or propane, catering to different user preferences and needs. This flexibility makes it an ideal option for various homes and setups. The unit’s efficiency rating is impressive, with a thermal efficiency of over 80%, which means less fuel is consumed while still delivering substantial heat.

Aesthetically, the CIBV-30-2 boasts a stunning view of the flames, thanks to its large glass front. This feature not only enhances the ambiance of the room but also allows easy monitoring of the fire. The fireplace is available with optional decorative rock or log sets, enabling homeowners to customize the look to suit their decor style.

Additionally, the CIBV-30-2 is equipped with advanced controls that allow for precise temperature management. Optional remote control features are available, giving users added convenience to adjust the settings from a distance. Safety is also a priority; the unit includes built-in safety features to prevent over-heating and ensure reliable operation.

In summary, the Empire Comfort Systems CIBV-30-2 direct vent gas fireplace combines efficiency, flexibility, and beauty, making it an excellent choice for anyone looking to enhance their home’s comfort and style. With its modern design, advanced technology, and user-friendly features, this fireplace stands out as a remarkable solution for heating and ambiance in any living space.
Top Page Image Contents