PILOT FLAME CHARACTERISTICS (continued)
Cleaning and Maintenance/Pilot
Oxygen Depletion Sensor Pilot
When the pilot has a large yellow tip flame, clean the Oxygen
Depletion Sensor as follows:
1.Clean the ODS pilot by loosening nut B from the pilot tubing. When this procedure is required, grasp nut A with an open end wrench.
2. Blow air pressure through the holes indicated by the arrows. | Figure 18 | |
This will blow out foreign materials such as dust, lint and | ||
| ||
spider webs. Tighten nut B also by grasping nut A. |
|
WIRING
Wiring Diagram for
Figure 19
Page 18 |
