Energizer ATX612 specifications Unpacking the Instrument, Instrument Operation

	2.	UNPACKING THE INSTRUMENT
			The shipping box should contain the following items.
			Account for each item before discarding the box.
			QUANTITY	PART NUMBER	DESCRIPTION
		1		1810-2707	ATX612 Multi-Gas Monitor
		1		1706-3421	ATX612 Instruction Manual
		1		1706-3256	Maintenance Tool
		1		1810-0628	Shoulder Strap
		1		1810-3077	Charging Adapter
					(with Nicad Battery Only)
		1		1705-1710	Power Cord
			After unpacking, if any listed item is missing, contact
			either your local distributor of Industrial Scientific products,
			or call Industrial Scientific Corporation at 1-800-DETECTS
	3.		(338-3287) in the United States and Canada, or
		412-788-4353.
		ATX612 FEATURES
			The Industrial Scientific ATX612 Multi-Gas Monitor may
			be configured to continuously monitor one, two, three or
			four gases in any combination of the following:
			• Oxygen
			• Combustible gases (%LEL) or methane (% by volume
			CH4). User selects %LEL or %CH4 prior to calibration.
			• Any two of the following toxic gases:
			Carbon Monoxide
			Hydrogen Sulfide
			Sulfur Dioxide
			Chlorine
			Nitrogen Dioxide
			Chlorine Dioxide
			• The ATX612 automatically recognizes and displays the
			installed sensors when switched on.
			• One-Button calibration (microprocessor controlled).
			• Built-in pump for remote gas sampling.
			• Backlit display for viewing in low light conditions.
			• Round-the-clock monitoring capability using the
			interchangeable rechargeable nickel-cadmium (Nicad) or
			replaceable alkaline battery packs.
4			• Plug-in sensors that can be changed or replaced without
			special tools or soldering equipment.

•90 dB audible and ultra-bright visual alarm indicators.

•Optional external audible or vibrating alarms.

•High and low alarms for combustible and toxic gases; enrichment and depletion alarms for oxygen.

•User selectable latching alarms.

•User selectable access code for security of calibration and alarm settings.

•Combustible gas OVER-RANGE protection.

•PEAK reading mode.

•Press and hold power switch to prevent accidental turn ON or turn OFF.

•Hygiene/Datalogging option that can be installed by the factory or the customer, to provide short term exposure limit (STEL) and time-weighted average (TWA) readings with 110 hours datalogging capacity.

•The ATX612 is classified as intrinsically safe by the following agencies:

-Underwriters Laboratories (UL).

-Canadian Standards Association (CSA). Canadian Standards Association has assessed only the combustible gas portion of this instrument for performance.

-Mine Safety and Health Administration (MSHA).

-Workcover Authority, NSW, Australia.

-Department of Mineral Resource, NSW, Australia.

-CENELEC (DEMKO)

4. INSTRUMENT OPERATION

4.1CHARGING THE BATTERY (NICAD BATTERY OPTION)

If the ATX612 is equipped with a Nicad battery pack, fully charge the battery pack before use. A universal charging adapter is included with the unit for charging the ATX612 battery pack. The battery pack may be charged while attached to the instrument or when removed to allow round-the-clock operation of the ATX612 using a spare battery.

The ATX612 is equipped with a nickel-cadmium battery pack with a built-in “smart” charging system. When plugged into the charging adapter, the battery will recharge at a high rate until fully charged and then will reduce to a maintenance trickle charge rate. The battery will not be damaged if it is left connected to the charger for extended periods.

5