Energizer ATX612 specifications Fast charged, in trickle

0	0
2 1 . 0		0

Battery Status

Indicator

Ultra-bright Visual Alarm Light Bar

A dead battery will be fully recharged in 4.5 hours. The Nicad battery pack has a LED charge status indicator to show the current status when connected to the charger.

The LED indicator has five states as follows:

• Solid Amber:	Fast charge in progress
• Solid Green:	Fully charged, in trickle
	charge mode
• Flashing Green:	Battery too hot/cold to be
	fast charged, in trickle
	charge mode
• Flashing Amber:	Instrument running, fast
	charge mode

•Alternating Green/Amber: Trouble, electrical problem in battery pack

A fully charged Nicad battery pack will typically operate a four-gas configured ATX612 for up to 16 hours. When the instrument is in the normal viewing mode, an eight- segment battery status indicator continuously displays the battery condition. Each segment represents approximately 2 hours of operating time. When the battery is fully discharged, the display will read BATTERY FAIL and the instrument will emit a short beep once a second (See Section 4.6.6). Turn off the instrument and recharge the battery pack when BATTERY FAIL appears.

!	WARNING: Recharge Nicad battery pack only in a
	non-hazardous location.

Infrared Data Interface

Charging Socket

(Nicad Versions)

Battery Pack

Hex Screws

Pump Exhaust Port

Gas Sample Inlet Fitting

Shoulder Strap/

Optional Handle

Attachment

Figure 2

%PPM

		BATT		Display
	OXYGEN		LEL
Hidden (-) Key	INDUSTRIAL	ATX612
	SCIENTIFIC
				Hidden (+) Key

ON/OFF MODE E

Enter/Backlight Key

On/Off/Mode Key

Alarm Speaker

Figure 1

Interchangeable Nicad or Alkaline Battery Pack

External Alarm Jack

Figure 3

6 7