and receiving phone calls and intercom calls. No base station or handset programming is needed for basic operations.
Note:
1.Handset(s) packaged along with a Base Station are pre- registered at the factory. If you have a new handset, you will need to register the handset with the base station in order to be recognized as a member handset by the base(s) and by other handsets. See Handset Registration.
2.Fully charge battery packs before the first usage.
Basic Operations
Operation Modes
Both the base station and handset have levels of operation at which time only certain procedures of functions can be performed.
A. Base Operation Modes
1.IDLE mode- this is the default mode. The intercom, broadcast, and volume keys are active in IDLE mode.
2.TALK mode- the base operates in this mode during phone call, intercom, and broadcast operation. The “In Use”, “Intercom”, and “Broadcast” LED will light up respectively.
3.REGISTRATION mode- the base enters this mode by pressing the REG button for three seconds. There are no active base unit keys once this mode has been entered. Four LEDs will be lighted up in Registration mode.
B. Handset Operation Modes
1.IDLE mode- this is the default mode.
a.If there is no
b.The handset can be turned off completely by holding down the END key for 3 seconds.
c.The idle screen display (custom name) can be edited.
d.The
2.Menu mode
a.Press the Right soft function key to activate MENU mode.
b.In MENU mode, the handset settings and information contained in memory can be changed.
c.The functions available through the MENU selection are covered in greater detail from page 38.
d.The MENU structure display as below:
11
Welcome!
REDIAL MENU
11
Main Menu: ÇÈ 1.KeyGuard 2.PhoneBook
~21~ | ~22~ |
