EnGenius Technologies 3616A-SN1302 manual ~13~

a.Five-level ringer volume selections (high/ low/ vibrate/ vibrate-then- ring/ off)

b.Four ringer type selections

3.Caller ID

a.Displays incoming call phone number and name on the LCD (needs Caller ID service from local telephone company)

4.Call waiting with caller ID

a.Displays 2nd incoming call information on the same phone line when 1st call is in progress (needs Call Waiting with Caller ID service from local telephone company)

5.Name tagging with caller ID

a.Match the caller ID with the phone book entries; once matched, the LCD screen will display the name or nickname instead of pure caller ID info (needs Call Waiting with Caller ID service from local telephone company)

6.DND (Do Not Disturb, i.e., Silent Ring)

7.Three Call Logs

a.Called Log: Stores 10 phone numbers (up to 28 digits each) dialed most recently. Can perform last-number redial on all 10 numbers.

b.Received Call Log: 10 entries (14-digit phone number, 14-character names, and time stamp), needs Caller ID service from local telephone company.

c.Missed Call Log: 10 entries (14-digit phone number, 14-character names, and time stamp), needs Caller ID service from local telephone company.

d.Phone numbers and names can be saved into phonebook while in display.

8.Call barring

a.Block the users from dialing the long distance calls or international calls

b.Up to 5 digits of each call barring setting; up to 4 entries allowed

c.If you need to dial a specific number to retrieve the dial tone, you need to key in that number while setting the call barring

[Note] you need to key in the accurate user ID and password to perform this feature. The default password is 0000

~13~

9.Any Key Answer (except END, Silent Soft Key)

10.Key-guard

11.Dialing Prefix

a.Up to 14 digits, including pause(s), one access code can be pre- programmed to be added automatically in front of the dialed number when dialing from call logs, phonebook, and dial-and-send dialing.

12.Call Hold

a.Places call on hold

b.Battery Hot Swap: Change battery while call is on hold.

13.Mute

14.Phonebook

a.30 entries, each stores a phone number or handset ID (up to 28- digit) and name (up to14-character)

b.Alphabetically sorted display and search by letter

c.Dial from display

d.During the stand-by mode, you can enter the phone book by pressing ¿orÀ scrolling key

15.Key tone

a.Three-level key-tone volume selections (high/low/off)

b.Four key-tone type selections

16.Call timers

a.Display call time duration for current call during and immediately after the call

17.Text Messaging:

a.Editing Message: from a handset, users can edit the short text message for up to 50 characters. Up to 5 messages can be edited and stored.

b.Sending Message: In view mode, handset can send a message to another handset or a group of handsets.

c.Incoming Message: A distinctive tone alerts an incoming message. The message will stay on LCD display for 8 seconds and then is saved in memory. A total of 5 incoming messages can be saved.

18.Programmable PBX Options

~14~