EnGenius Technologies EAP9550 4.2.1.4. Security

• Data rate: You may select a data rate from the drop-down list, however, it is recommended

to select auto. This is also known as auto-fallback.

• N Data Rate: You may select N data rate from the drop-down list, however, it is

recommended to select auto.

• Channel Bandwidth: Select channel bandwidth (Auto 20/40MHz or 20MHz)

• Preamble Type: Select a short or long preamble. For optimum performance it is

recommended to also configure the client device as the same preamble type.

• CTS Protection: CTS (Clear to Send) can be always enabled, auto, or disabled. By enabled

CTS, the Access Point and clients will wait for a ‘clear’ signal before transmitting. It is

recommended to select auto.

4.2.1.4. Security

Contents

Main EnGenius EAP9550 11N Multi-Function AP/Repeater Table of Content Page 1. Introduction EAP9550 1.1. Features and Benefits 1.2. Package Contents 1.3. System Requirement 2. Understanding the Hardware 2.1. Hardware Installation 3. Modes Page Page Page Page Page 4.2.1.2. Basic 4.2.1.3. Advanced 4.2.1.4. Security Encryption: Disabled Encryption: WEP Encryption: WPA pre-shared key Encryption: WPA RADIUS 4.2.1.5. Filter 4.2.1.6. WPS 4.2.1.7. Client List Page Page Page Security: Disabled Security: WEP Security: WPA pre-shared key 4.2.2.3. Advanced Page Page 4.2.3.2. Basic 4.2.3.3. Advanced 4.2.3.4. Security Page Encryption: WPA pre-shared key 4.2.3.5. Filter 4.2.3.6. WPS 4.2.3.7. Client List Page 4.3. Network Page 4.4. Management 4.4.3. UPnP Plug-and-Play Page 4.5. Tools 4.5.1. Time Setting Page Page Appendix A FCC Interference Statement Appendix B IC Interference Statement