EnGenius Technologies EAP9550 4.3. Network

4.3. Network

4.3.1. Status

4.3.2. LAN

• Bridge Type: Select Static IP or Dynamic IP from the drop-down list. If you select Static IP,

you will be required to specify an IP address and subnet mask. If Dynamic IP is selected,

then the IP address is received automatically from the external DHCP server.

• IP Address: Specify an IP address.

• IP Subnet Mask: Specify a subnet mask for the IP address.

• Default Gateway: Specify the IP address of the default gateway, which is assigned by your

ISP.

• 802.1d Spanning Tree: Select Enable or Disable from the drop-down list. Enabling

spanning tree will avoid redundant data loops.

Contents

Main EnGenius EAP9550 11N Multi-Function AP/Repeater Table of Content Page 1. Introduction EAP9550 1.1. Features and Benefits 1.2. Package Contents 1.3. System Requirement 2. Understanding the Hardware 2.1. Hardware Installation 3. Modes Page Page Page Page Page 4.2.1.2. Basic 4.2.1.3. Advanced 4.2.1.4. Security Encryption: Disabled Encryption: WEP Encryption: WPA pre-shared key Encryption: WPA RADIUS 4.2.1.5. Filter 4.2.1.6. WPS 4.2.1.7. Client List Page Page Page Security: Disabled Security: WEP Security: WPA pre-shared key 4.2.2.3. Advanced Page Page 4.2.3.2. Basic 4.2.3.3. Advanced 4.2.3.4. Security Page Encryption: WPA pre-shared key 4.2.3.5. Filter 4.2.3.6. WPS 4.2.3.7. Client List Page 4.3. Network Page 4.4. Management 4.4.3. UPnP Plug-and-Play Page 4.5. Tools 4.5.1. Time Setting Page Page Appendix A FCC Interference Statement Appendix B IC Interference Statement