40
DHCP
Internet Connection Type
Account Name
Domain Name
MTU
Get Automatically From
ISP
Use These DNS Servers
Discard Ping on WAN
Accept / Cancel
Select DHCP to begin configuration of the DHCP connection. Enter the account name provided by your ISP.
Enter the domain name provided by your ISP.
Specify the Maximum Transmit Unit (MTU) size. It is recommended that you accept the default setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set too high or too low, which impacts network performance. In extreme cases, an MTU setting that is too low can prevent the ECB350 from establishing some connections.
Click this radio button to obtain the DNS automatically from the DHCP server.
Click the radio button to set up the Primary DNS and Secondary DNS servers manually.
Check to Enable to recognize pings on the ECB350 WAN interface or Disable to block pings on the ECB350 WAN interface. Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is valid. Blocking pings provides extra security from hackers.
Click Accept to confirm the changes or Cancel to cancel and return previous settings.
