Enlight user manual Series EN-7100

Series EN-7100

***Important-First please check your model number before proceeding. The user manual is set up to correspond to the model number and installation will vary depending on the model.

Required tools: Phillips head screwdriver, pliers

***(Photos shown may vary according to model number)

Place case on edge of table (Fig.1). With one hand holding top of chassis, pull quickly from the bottom of the bezel to remove it (Fig. 2). **Note-It might require some force to remove due to the snug fit to the chassis.

Fig:1

Fig:2

Remove screws. Place hands on sides of top cover and thumbs firmly on chassis. Slide top cover towards you 1" (Fig. 3). Spread sides and lift straight up to remove.

Fig:3