About this Guide
This guide provides an overview, installation and troubleshooting instructions, and specifications for the Enterasys SecureStack C2RPS‐SYS redundant power system components: chassis (C2RPS‐CHAS8), power supply module (C2RPS‐PSM), DC power cables (C2RPS‐PSM Cable), and AC power cords.
Note: In this document, the following terms are used:
• RPS refers to the complete SecureStack
•Chassis refers to the
•PSM refers to the
•PSM cable refers to the
Using This Guide
Read through this guide completely to familiarize yourself with its contents and gain an understanding of the features and capabilities of the RPS components. A general working knowledge of data communications networks is helpful when setting up an RPS.
Structure of This Guide
This preface includes an overview of this guide and details the conventions used in this guide. This guide is organized as follows:
Chapter 1, Introduction, discusses the features and capabilities of the RPS. This chapter also provides the instructions for obtaining help from Enterasys Networks, if needed.
Chapter 2, Installation, provides instructions to install an RPS into a standard 19‐inch rack. This involves installing the chassis, one to eight PSMs, PSM interconnecting cables, and AC power cords.
Appendix A, Specifications, provides the specifications for the chassis, PSM, PSM cable, Redundant Power Supply connector pinout descriptions, and Compliance Standards.
SecureStack C2 Installation Guide xi
