Note: In the CLI output for show system hardware, model name part numbers of modules are labeled “Part number.”
2.Use the information from the output of the show system hardware command to fill out the worksheet in Table 1‐1 for each module as follows:
a.Use the value of “940 Part number:” from the output of the show system hardware command to fill out the 940 Part Number section of Table 1‐1.
b.Use the value of “940 Serial number:“ from the output of the show system hardware command to fill out the 940 Serial Number section of Table 1‐1.
Table 1-1 Worksheet: DC Compliance of Modules in Existing AC Systems
Model Part No. |
| 940 Part Number |
| 940 Serial Number |
| DC Compliant? | |||
|
|
|
|
|
|
|
|
|
|
| 940 | Last 4 digits of | Site Code | Date Code |
| Serial | Site | 940 |
|
|
| 940 Number |
| (year, work |
| Number | Code | Revision |
|
|
|
|
| week) |
| Counter |
|
|
|
|
|
|
|
|
|
|
|
|
|
Example: | 940 | 4179 | 000 | 0747 |
| 5281 | 63 | 5A | YES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.Compare the values in the shaded cells of the completed worksheet in Table 1‐1 to the minimum values shown in Table 1‐3 on page 1‐8 to determine the DC compliance of the installed modules.
