Enterasys Networks RBT-1602 manual Lightning Protector Installation

Lightning Protector Installation

To install the RoamAbout Lightning Protector, perform the following steps:

1.Determine a suitable location for the Lightning Protector as described in Chapter 2.

2.Use lock washer and hex nut to secure ring‐terminal to the longer of the threaded ends of the Lightning Protector.

3.Connect ground‐wire to ring terminal.

4.Connect the longer threaded end of the protector to a Reverse‐N Female cable connected to a RoamAbout Access Point.

5.Connect the shorter threaded end of the protector to a Reverse‐N Female cable connected to the antenna.

Caution: To avoid damage to the RoamAbout equipment, always install the RoamAbout Lightning Protector between the outdoor antenna installation and the RoamAbout AP or other computing device connected to the outdoor antenna.

Precaución: para evitar daños a los equipos RoamAbout, debe asegurarse de instalar el pararrayos RoamAbout Lightning Protector entre la antena para exteriores y el RoamAbout AP o cualquier otro dispositivo electrónico conectado a la antena.

Achtung: Zum Schutz der RoamAbout-Ausrüstung ist der RoamAbout-Blitzableiter zwischen der Außenantenne und dem RoamAbout AP oder sonstigen an die Antenne angeschlossenen Computergeräten zu installieren.

RoamAbout Antenna Site Preparation and Installation Guide 3-5